Siklu - 710TX Antenna Installation

Edited

Problem Description:

1ft Antenna EH-ANT-1ft-B does not fit Etherhaul 710TX-ODU-EXT due to the antenna wave-guide having a screw adapter.

How to fix:

Please follow the steps below if you have a 1ft antenna with a threaded wave-guide and the EH-710TX-ODU-EXT.

Place the antenna face down on a flat surface. Leave on the plastic cover to protect the hydrophobic coating.
2. Dismantle the antenna nut (threaded white plastic ring ) by unscrewing the 3 Philips screws. Discard the nut, metal guiding ring, and screws, but leave the O-ring in place.

3. Place the radio on top of the antenna. The external connectors on the radio and the draining hole on the antenna must be aligned.

Use a Philips medium-head screwdriver to connect the radio and antenna, working in a criss-cross pattern, while tightening all 4 screws.

Was this article helpful?

Sorry about that! Care to tell us more?

Thanks for the feedback!

There was an issue submitting your feedback

Please check your connection and try again.