Problem Description:
Ruckus are well known for supporting older access points for a long period of time however there comes a time when the new access point models require a firmware which the older models simply are not compatible with.
The aim of this guide is to inform you of the last supported firmware for the end of sale access points and the minimum supported firmware for the current models
Please ensure you read the release notes prior to upgrading/downgrading.
End of Sale Access Point Firmware Guide:
*** Please note ***
Any firmware greater than what is listed will not be supported by the below access points and as a result will not function on a Zonedirector controller
On the SmartZone the zone will be locked to the firmware level of the access point so it is advised if a newer model of access point is to be installed that requires newer firmware a new zone is created for that specific access point. This will allow for a migration path if a phased deployment is required.
Zone Flex Access Point Model | Last Supported Zonedirector 1200 Firmware | Last Supported Zonedirector 3000 Firmware | Last Supported SmartZone Firmware |
7055 | 10.1.2 | 10.1.2 | 3.6.2 |
7321 | 9.12.3 | 9.12.3 | 3.1.2 |
7321-u | 9.12.3 | 9.12.3 | 3.1.2 |
7341 | 9.12.3 | 9.12.3 | 3.1.2 |
7343 | 9.12.3 | 9.12.3 | 3.1.2 |
7352 | 10.1.2 | 10.1.2 | 3.6.2 |
7363 | 9.12.3 | 9.12.3 | 3.1.2 |
7372 | 10.1.2 | 10.1.2 | 3.6.2 |
7372-E | 10.1.2 | 10.1.2 | 3.6.2 |
7441 | 9.12.3 | 9.12.3 | 3.1.2 |
7761-CM | 9.12.3 | 9.12.3 | 3.1.2 |
7762 | 9.12.3 | 9.12.3 | 3.1.2 |
7762-AC | 9.12.3 | 9.12.3 | 3.1.2 |
7762-S | 9.12.3 | 9.12.3 | 3.1.2 |
7762-S-AC | 9.12.3 | 9.12.3 | 3.1.2 |
7762-T | 9.12.3 | 9.12.3 | 3.1.2 |
7781-CM | 10.1.2 | 10.1.2 | 3.2.1 |
7782 | 10.1.2 | 10.1.2 | 3.6.2 |
7782-E | 10.1.2 | 10.1.2 | 3.6.2 |
7782-N | 10.1.2 | 10.1.2 | 3.6.2 |
7782-S | 10.1.2 | 10.1.2 | 3.6.2 |
7982 | 10.1.2 | 10.1.2 | 3.6.2 |
H500 | 10.1.2 | 10.1.2 | 3.6.2 |
R300 | 10.1.2 | N/A | 3.6.2 |
R700 | 10.3.1 | 10.2.1 | 5.1.2 |
R310 | 10.5.1 | 10.2.1 | 5.2.2 |
R500 | 10.5.1 | 10.2.1 | 5.2.2 |
R600 | 10.5.1 | 10.2.1 | 5.2.2 |
T300 | 10.5.1 | 10.2.1 | 5.2.2 |
T300e | 10.5.1 | 10.2.1 | 5.2.2 |
T301n | 10.5.1 | 10.2.1 | 5.2.2 |
T301s | 10.5.1 | 10.2.1 | 5.2.2 |
Current Generation Access Point Guide
Any firmware higher than the below will work with these access points
Access Point Model | Minimum Zonedirector Firmware | Minimum SmartZone Firmware |
R760 | Not Supported | 6.1 |
R560 | Not Supported | 6.1 |
R850 | 10.4.1 | 5.2.1 |
R750 | 10.3.1 | 5.1.2 |
R650 | 10.4.1 | 5.2.1 |
R550 | 10.4.1 | 5.2.1 |
R350 | 10.5 AP Patch | 6.0 |
R730 | 10.1.2 | 3.6.2 |
R720 | 10.0.1 | 3.5.1 |
R320 | 10.2.1 | 5.1.1 |
R510 | 9.13.3 | 3.4.2 |
R610 | 9.13.3 | 3.4.2 |
R710 | 9.12.3 | 3.1.2 |
H510 | 9.13.3 | 3.4.2 |
H550 | 10.5.0 | 6.0 |
H320 | 10.0.1 | 3.5.1 |
H350 | 10.5.1 | 6.0 |
Access Point Model Outdoor | Minimum Zonedirector Firmware | Minimum SmartZone Firmware |
T310C | 10.1.2 | 3.6.2 |
T310S | 10.1.2 | 3.6.2 |
T310N | 10.1.2 | 3.6.2 |
T310D | 10.1.2 | 3.6.2 |
T350 | 10.5.0 | 6.0 |
T350SE | 10.5.1 | 6.0 |
T610 | 9.13.3 | 3.4.2 |
T610s | 9.13.3 | 3.4.2 |
T710 | 9.13.3 | 3.4.2 |
T710s | 9.13.3 | 3.4.2 |
T750 | 10.4.1 | 5.2.1 |
T750SE | 10.4.1 Refresh 1 | 5.2.1 |
Comments
0 comments
Please sign in to leave a comment.