Converting Ruckus Unleashed to Ruckus Cloud

Step 1

Unplug all APs from Ethernet.

Step 2 - Factory reset the APs that you want to connect to the Ruckus Cloud.

Power on the AP and wait 30 seconds for the AP boot process to proceed. Then press and hold the reset button for 10+ seconds.

Step 3

Add the AP serial # to your cloud account.

Step 4

Repeat steps #2-#3 for each AP that you want to add to your cloud account.

Step 5 - Wait for these APs to connect to the Ruckus Cloud prior to step 6.

The AP status in the Cloud user interface will show as “operational.”

Refer to the AP LED status in the Quick Start Guide.

Step 6

You can now connect your remaining Unleashed APs to the Ethernet. The Cloud APs and Unleashed cluster can now co-exist.