Here is how to add/register a handset to the master base station.
After logging into the system you will need to go to users, down the left hand side.
Once you are in the users section you are able to show, new, import and export users/handsets.
There are now two ways to add a new users. You can add them one by one or multiple at once (bulk upload).
Single User - To add 1 user, firstly you select new:
This will open a new window where you will be able to add a user or an administrator.
Multiple Users - To add multiple users, you will need to create a .txt document in the following format:
Long Name;Name;Number;Display Name;Auth. Name;Idle Display;IPEI/IPDI;;
Once you have done this you can now import the file.
Now to view all of these users you will need to select show.
3. Finding your IPEI/IPDI number.
The easiest way to find your IPEI/IPDI number is by turning the handset on, and when it tries to subscribe select cancel. It will then show your IPDI.
Also please be aware on some handsets you can find the IPEI/IPDI number under the battery.
4. Authentication Code
Your authentication code must match the IPDECT base, this can be found under DECT on the left hand side. Under system -