1. Navigate to Configure > WLAN > Passpoint tab. The following fields are displayed.
a) Select Enable checkbox to enable passpoint functionality.
b) Select DGAF checkbox to enable Downstream Group Addressed Forwarding
functionality.
c) Enter the domain identifier value in ANQP Domain ID textbox.
d) Choose the Access Network Type value from the drop-down list.
e) Select the ASRA checkbox if the network requires additional steps for access.
f) Select the Internet checkbox for the network to provide connectivity to the Internet.
g) Enter the HESSID to configure the desired specific HESSID network identifier or the
wildcard network identifier.
h) Choose the Venue Info from the drop-down list.
i) To add Roaming Consortium value, enter the value in the textbox and click Add.
To delete a Roaming Consortium value, choose it from the drop-down list and click
Delete.

1. Navigate to Configuration > WLAN > Passpoint tab.
2. Under ANQP Elements, perform the following:
a. Select 3GPP Cellular Network Information from the drop-down list.
b. Enter the country code and network code in the textboxes next to 3GPP.
c. Click Add and Save.

1. Navigate to Configuration > WLAN > Passpoint tab.
2. Under ANQP Elements, perform the following:
a. Select Connection Capability from the drop-down list.
b. Select the Hotspot IP Protocols and the associated port numbers from the drop-down list next to Connection Capability.
c. Click Add and Save.
Note: To delete the configured connection capability, choose it from the drop-down list and click
Delete.

1. Navigate to Configuration > WLAN > Passpoint tab.
2. Under ANQP Elements, perform the following:
a. Select Domain Name List from the drop-down list.
b. Enter the domain name in the textbox next to Domain Names field.
c. Click Add and Save.
Note: To delete the configured domain name list, choose it from the drop-down list and click
Delete.

1. Navigate to Configuration > WLAN > Passpoint tab.
2. Under ANQP Elements, perform the following:
a. Select IP Address Type Information from the drop-down list.
b. Select the IPV4 or IPv6 address type information from the drop-down list.
c. Click Add and Save.

1. Navigate to Configuration > WLAN > Passpoint tab.
2. Under ANQP Elements, perform the following:
a. Select Operating Class Indication from the drop-down list.
b. Enter the list of channels separated by commas in the textbox next to Operating Class Indication field.
c. Click Add and Save.
Note: To delete the configured Operating Class Indication, choose it from the drop-down list and
click Delete.

1. Navigate to Configuration > WLAN > Passpoint tab.
2. Under ANQP Elements, perform the following:
a. Select Operator Friendly Names from the drop-down list.
b. Enter the name of the operator and lang code in the textboxes next to Operator Friendly Names
field.
c. Click Add and Save.

1. Navigate to Configuration > WLAN > Passpoint tab.
2. Under ANQP Elements, perform the following:
a. Select Venue Names Information from the drop-down list.
b. Enter the name of the venue and lang code in the textboxes next to Venue Names field.
c. Click Add and Save.
Note: To delete the configured Venue Name, choose it from the drop-down list and click Delete

1. Navigate to Configuration > WLAN > Passpoint tab.
2. Under ANQP Elements, perform the following:
a. Select WAN Metrics from the drop-down list.
b. Enter the WAN Metrics in the textbox next to WAN Metrics field.
c. Click Add and Save.