Ruckus ICX - Inter-VLAN Routing

Purpose

The purpose of this guide is to demonstrate how to implement Inter-VLAN Routing

Tested on version 08.0.80

Pre-Requisite

The switch must be on the routing firmware on version 08.0.80

This must be completed in privileged exec mode

Configuration

Define the layer 2 VLANs

• VLAN 10 name Production
• router-interface ve 10 <<< This creates a layer 3 interface
• untagged ethernet 1/1/1      
• exit
• VLAN 20 name Servers
• router-interface ve 20 <<< This creates a layer 3 interface
• untagged ethernet 1/1/2 
• exit

Define the layer 3 Interfaces

• interface ve 10
• ip address 10.10.0.1 255.255.255.0
• exit
• interface ve 20
• ip address 10.20.0.1 255.255.255.0
• exit

You will now be able to ping the gateway addresses which proves that Inter-VLAN routing is working.