Ruckus ICX Switching

The purpose of this guide is to demonstrate how to enable SDVOE   The switch must be on switching firmware version 08.0.80     ip multicast active OR ...

The purpose of this guide is to demonstrate how to optimize traffic when using iSCSI   This must be completed in privileged exec mode   jumbo   symmet...

The purpose of this guide is to demonstrate how to recover the firmware and bootrom for a switch that has had either the wrong firmware applied or the...

The purpose of this guide is to demonstrate how to implement policy based routing (PBR). PBR is useful when you have a scenario where by you need spec...

Purpose The purpose of this guide is to demonstrate how to recover the password for a switch that the user has miss placed the password for. Please en...

The purpose of this guide is to demonstrate how to implement Inter-VLAN Routing Tested on version 08.0.80 The switch must be on the routing firmware o...

The purpose of this guide is to demonstrate how to detect other switches, access points or any device which uses LLDP/CDP/FDP to share its identity. L...

The purpose of this guide is to demonstrate how to manage a Ruckus ICX switch via the SmartZone platform.   The switch must have DNS and a default gat...

The purpose of this guide is to demonstrate how to upgrade / elevate a license.   The license must be registered with Ruckus via the activation link i...

The purpose of this guide is to demonstrate how to mirror a remote switch port to your local computer.     This will only work for layer 2 VLANS, shou...

The purpose of this guide is to demonstrate how to make the switch forward DHCP packets to the DHCP server for local subnets that it is routing for. T...

Purpose: The purpose of this guide is to demonstrate how to upgrade the firmware for a Ruckus ICX switch which has just been unboxed and upgrading to ...

The purpose of this guide is to demonstrate how to restore the configuration of any ICX switch.   The switch must have an IP address TFTP must be inst...

The purpose of this guide is to demonstrate how to back up the configuration of any ICX switch. Whilst the below could be used to backup the running-c...

The purpose of this guide is to demonstrate how to stack ICX switches. Stacking switches provides the benefit of combining multiple switches to act as...

Purpose The purpose of this guide is to template the most basic edge switch installation. Please note that creating additional VLANs will need to be m...

Purpose The of this guide is to demonstrate how to create a VLAN and tag or untag a port to a physical interface Tested on version 08.0.80 Pre-Requisi...

Managing a switching network can be tedious and troublesome, especially when there can be many unknowns such as end-user devices being plugged into at...

Purpose The purpose of this guide is to demonstrate how to make the switch act as a DHCP server for local subnets that it is routing for.   Pre-Requis...

Purpose The purpose of this guide is to demonstrate how to make a switch auto-provision the configuration intended for it. This is useful when multipl...