Cambium 450b factory reset
Edited
Problem Description:
If a Cambium 450b needs to be reset there is a specific process that needs to be followed.
How to fix:
Step 1
Apply power to PSU for at least 10 seconds.
Remove power from the PSU, and then re-apply it as soon as the power indicator light
goes out (about 1 second).
When the unit is in recovery mode, access the web interface by entering the default IP
address 169.254.1.1. The Recovery Image Warning page is displayed.
Step 2
Review the Boot Selection.
Select "Boot - Default"
Step 3
Login with the following credentials username= admin password= admin
Then select Configuration > Unit Settings > Set To Factory Defaults followed by "Full Reboot"
Was this article helpful?
Sorry about that! Care to tell us more?