Cambium Core

Initial guide to creating a basic point-to-point transparent bridge link using two PMP 450b radios.  Under Configuration > General > Region Settings ...

1. Download and install the latest CNUT software at https://support.cambiumnetworks.com/files/cnut/ 2. In the CNUT, select: Edit --> add elements to ...

If a Cambium 450b needs to be reset there is a specific process that needs to be followed. Apply power to PSU for at least 10 seconds. Remove power fr...

Guide to creating a basic Pipe 1+0 link using two PTP 820 S radios. Navigate to the Web GUI page  Default IP 192.168.1.1 However for this guide we hav...

Should the customer have an issue with Cambium core equipment and requires Cambium Tech Support to deep dive investigate the issue the field engineeri...

Login to the WebGUI - Default IP  https://192.168.1.1 Default Login Credentials Username: admin Password: admin   Always check the Firmware release n...

N000082L030A PTP 820 Act.Key - Agg-Lvl-1-CET-Node mode Agg-Lvl-1-CET-Node – Up to 64 services - Enables Carrier Ethernet Transport (CET) and a number ...

By default, Cambium Core radios will not automatically join cnMaestro. In order for this to happen, we need to manually apply onboarding details.   Lo...

Description: This guide is to document the upgrade process of PMP 4XX SM Units using CNUT  Method: Step1: Add Network Elements Discovery Target Optio...

Should it be desired to alter the administrator and/or root passwords for the PMP 450 series a template may be created within cnMaestro, which would t...

Cambium's new cnPulse GPS module appears to have just one port with AUX output. Does this mean we only can use this for  one  PMP450 and not two as we...

Purpose The purpose of this guide is to demonstrate how to apply a License to the 450 unit   License installation  You will need the activation key of...