On occasion, a Firebox will need to be factory reset such as when building the cluster.
Resetting a Firebox where the username and password is not known
- Power off the Firebox.
- Press and hold the Reset button on the front left of the device, and briefly press the Power button on the front of the device to power it on.
- Continue to hold the Reset button until the Shield indicator flashes green rapidly.
- After the Shield indicator starts to flash green twice per second, release the Reset button.
- Wait until the Shield indicator starts to flash red.
- Press and hold the Power button for five seconds to power off the device.
- Briefly press the Power button on the front of the device to power it on.
- The Firebox restarts with factory-default settings.
Resetting a Firebox where the username and password is known
- Connect to the CLI by SSH or console
- Type the command "restore factory-default all"
Comments
0 comments
Please sign in to leave a comment.