WatchGuard
WatchGuard - Setting up Link Aggregation
To configure Interfaces you need to use Policy Manager Select Network > Configuration Select the "Link Aggregation" tab and click "Add" Name the Link ...
WatchGuard - Interface Configuration
To configure Interfaces you need to use Policy Manager Select Network > Configuration In this example, we will be selecting the interface type of ...
WatchGuard - Time Control / Scheduling
To configure Link Failover you need to use Policy Manager Select the firewall policy you wish to modify and click on advanced. Then select the plus ic...
WatchGuard - Resetting a FireBox
On occasion, a Firebox will need to be factory reset such as when building the cluster. Resetting a Firebox where the username and password is not k...
WatchGuard - Setting up VLAN Configuration
To configure Interfaces you need to use Policy Manager Select Network > Configuration Select the VLAN tab and click "Add" Define The VLAN Name, ID the...
WatchGuard - Site-To-Site VPN
Often a site to site VPN is required to create a tunnel to a remote site so it can access resources from head office and vice versa. How to configur...
WatchGuard - Natting 1-1
When you do not know the ports required for an inbound NAT rule a 1-1 NAT rule will be required, this will in effect allow all ports to communicate wi...
WatchGuard - Mobile VPN using IKEv2
A mobile VPN can be used when a remote client is trying to access the private internal network of a company. How to create: Step 1: To start setting u...
WatchGuard - Natting Static NAT Configuration
Using Policy Manager Select the Plus Icon Select from the list of existing "Packet Filters" or define a custom one using the option "Manage Custom" ...
WatchGuard - Firmware Upgrade
Go to System - Upgrade OS If this is a brand new system use the default IP Address If in a cluster login to the cluster IP Address Can either do thi...
WatchGuard - Rate Limiting - Per Policy
In some scenarios, it is necessary to apply a rate limit to a policy or individual subnets in this guide we cover the "Per Policy" rate limit where ea...
WatchGuard - WAN Link Fail-Over
To configure Link Failover you need to use Policy Manager Select Network > Configuration Select the "Link Monitor" tab first then select the externa...
WatchGuard - DHCP Option 43 Configuration
Ruckus AP's you need to specify the controller control address Select Network and then configure Select the VLAN or interface and then configure or ...
WatchGuard - DHCP Configuration
From the interface, screen selects the radio button "Use DHCP Server" and then click "Add" and define the start and end address of the pool. Should yo...
WatchGuard - High Availability Cluster Configuration
In order to configure a cluster, you must ensure that the "Trusted" network and any VLAN's are configured. Both WatchGuard Firewalls must be on the sa...
WatchGuard - Application Control
To configure Link Failover you need to use Policy Manager Select Subscription Services > Application Control In the window that opens up click "Add" ...