Nomadix

In this guide, we will be taking you through the steps for upgrading the firmware on the Nomadix gateway.   Step 1: The first thing you will need to d...

Enabling DHCP and VLAN Tagging   Step 1- To create a DHCP pool you will need to go into Configuration-->DHCP and from there you can start the process...

Step 1: The first step in this process will be to FTP the correct files to the gateway. To do this you will need to log into the gateway via FTP and t...

Backup File Configuration: It is advised that gateway devices should be on the same firmware when moving files between gateways as there can be occasi...

This guide will take you through the steps to enable port forwarding on the Nomadix device. NOTE: In the initial set up of the VSZ, when it asks for a...

Introduction: In this guide, we will be taking you through the steps for setting up clients that have requested a public IP address and want to reside...

Smartzone Setup: Step 1- Once logged into the Smartzone you will need to go into wireless LAN's and then select the + icon to create a zone.   Step...

Creating Access Codes: Step 1- The first step will be to configure the portal page in Configuration-->AAA. You will need to enable AAA and the portal...