Ruckus ICX Switching

Purpose The purpose of this guide is to demonstrate how to back up the configuration of any ICX switch. Whilst the below could be used to backup the r...

Purpose The purpose of this guide is to demonstrate how to restore the configuration of any ICX switch.   Pre-Requisite The switch must have an IP add...

Managing a switching network can be tedious and troublesome, especially when there can be many unknowns such as end-user devices being plugged into at...

Purpose The purpose of this guide is to demonstrate how to mirror a remote switch port to your local computer.     This will only work for layer 2 VLA...

Purpose The of this guide is to demonstrate how to create a VLAN and tag or untag a port to a physical interface Tested on version 08.0.80 Pre-Requisi...

Purpose The purpose of this guide is to demonstrate how to upgrade / elevate a license.   Pre-Requisites The license must be registered with Ruckus vi...

Purpose The purpose of this guide is to demonstrate how to stack ICX switches. Stacking switches provides the benefit of combining multiple switches t...

The purpose of this guide is to demonstrate how to manage a Ruckus ICX switch via the SmartZone platform.   The switch must have DNS and a default gat...

Purpose The purpose of this guide is to demonstrate how to detect other switches, access points or any device which uses LLDP/CDP/FDP to share its ide...

Purpose The purpose of this guide is to demonstrate how to recover the password for a switch that the user has miss placed the password for. Pre-Requi...

Purpose The purpose of this guide is to demonstrate how to implement policy based routing (PBR). PBR is useful when you have a scenario where by you n...

Purpose The purpose of this guide is to demonstrate how to optimise traffic when using iSCSI   Pre-Requisite This must be completed in privileged exec...

Purpose The purpose of this guide is to demonstrate how to recover the firmware and bootrom for a switch that has had either the wrong firmware applie...

Purpose The purpose of this guide is to demonstrate how to enable SDVOE   Pre-Requisites: The switch must be on switching firmware version 08.0.80   C...

Purpose The purpose of this guide is to demonstrate how to implement Inter-VLAN Routing Tested on version 08.0.80 Pre-Requisite The switch must be on ...

Purpose The purpose of this guide is to demonstrate how to make the switch act as a DHCP server for local subnets that it is routing for.   Pre-Requis...

Purpose The purpose of this guide is to demonstrate how to make a switch auto-provision the configuration intended for it. This is useful when multipl...

Purpose The purpose of this guide is to demonstrate how to make the switch forward DHCP packets to the DHCP server for local subnets that it is routin...

Purpose The purpose of this guide is to template the most basic edge switch installation. Please note that creating additional VLANs will need to be m...

Purpose: The purpose of this guide is to demonstrate how to upgrade the firmware for a Ruckus ICX switch which has just been unboxed and upgrading to ...